B3000 SE Regular Cab 4WD V6-3.0L OHV (1998)
Timing Chain: Service and Repair
REMOVAL AND INSTALLATION
1. Disconnect the battery ground cable.
2. Remove the water pump. refer to Water Pump Removal/Installation.
3. Disconnect the lower radiator hose at the engine front cover.
4. Remove the hood.
5. Attach the engine lifting eyes.
6. Remove the nuts.
7. Raise and support the engine.
8. Raise the vehicle on a hoist; refer to General Information.
9. Drain the engine oil.
10. Remove the starter motor; refer to Starter Motor Removal/Installation.
11. Remove the 16 bolts and the oil Pan.
12. Remove the oil pan gasket.
13. Remove the Crankshaft Position (CKP) sensor.