B3000 SE Regular Cab 4WD V6-3.0L OHV (1998)
Headlamp Switch: Service and Repair
1. Disconnect the battery ground cable.
2. Remove cluster finish panel.
3. Pull off and remove the headlamp switch knob.
4. Remove the headlamp switch.
1. Remove the screws.
2. Remove the headlamp switch.
5. Install in reverse order of removal.
Tightening torque: 2 - 3 N.m (20 - 31 kgf.cm, 18 - 26 in.lbf)