B3000 SE Regular Cab 4WD V6-3.0L OHV (1998)
Parking Lamp: Service and Repair
1. Pull out the parking lamp assembly.
1. Remove the screws.
2. Pull out the parking lamp assembly.
2. Remove the parking lamp assembly.
1. Disconnect the three connectors.
2. Remove the parking lamp assembly.
3. Install in reverse order of removal.
Tightening torque: 1.7 - 2.1 N.m (17.3 - 21 kgf.cm, 15 - 18 in.lbf)