mazda Workshop Repair Guides

Mazda Workshop Manuals

< PREV PAGE NEXT PAGE >
Page 1
background image

Combination Switch: Service and Repair

1. Disconnect the battery ground cable.
2. Remove the ignition switch lock cylinder.
3. If equipped, remove the tilt wheel handle.
4. Remove the upper and lower steering column shrouds.

5. Remove in order shown.

1. Screws
2. Connectors
3. Switch

6. Install in reverse order of removal.

Tightening torque: 2 - 3 N.m (20 - 31 kgf.cm, 18 - 26 in.lbf)

Lighting and Horns > Turn Signals > Combination Switch > Component Information > Testing and Inspection > Page 6127

< PREV PAGE NEXT PAGE >