B3000 SE Regular Cab 4WD V6-3.0L OHV (1998)
Fluid - Transfer Case: Testing and Inspection
CAUTION: If the proper fill procedures are not followed, transfer case failure can result.
NOTE: Fluid level should be just below the fill plug.
1. Remove the filler plug.
2. Verify oil level is near filler plug port. If it is low, add specified oil.
Specified Oil: ATF TYPE M-III or equivalent (e.g. MERCON(R))
3. Apply sealant to filler plug threads and install
Tightening torque: 19 - 30 Nm (1.9 - 3.1 kgf-m, 14 - 22 ft. lbs.)
