B3000 SE Regular Cab 4WD V6-3.0L OHV (1998)
Oxygen Sensor: Testing and Inspection
Fuel Monitor or HO2S Repair Verification Drive Cycle
1. Complete OBD II Vehicle Prep&ation
2. Start the engine and drive the vehicle for 7 minutes.
(1).Drive in stop and go traffic for 6 minutes, including one idle.
(2).Accelerate to 45 mph (72 km/h). Maintain speed for 1 minute.
3. Rerun Continuous Memory, KOEO and KOER self-tests.
