B3000 SE Regular Cab 4WD V6-3.0L OHV (1998)
Fuel Filler Hose: Service and Repair
WARNING: Do not smoke or carry lighted tobacco or open flame of any type when working on or near any fuel-related component. Highly
flammable mixtures are always present and may be ignited, resulting in possible personal injury.
WARNING: Fuel in the fuel system remains under high pressure even when the engine is not running. Before repairing or disconnecting any of
the fuel lines or fuel system components, the fuel system pressure must be relieved to prevent accidental spraying of fuel, causing personal
injury or a fire hazard.
1. Relieve system pressure.
See: Fuel Filter/Fuel Pressure Release
2. Disconnect the fuel filler pipes from the fuel tank.
(1).Loosen the fuel filler hose clamps.
(2).Disconnect the fuel tank filler pipes from the fuel tank.
3. Remove the fuel tank filler pipe.
(1).Remove the screws.
(2).Remove the fuel tank filler pipe.
4. Install in reverse order of removal.
