B4000 V6-4.0L SOHC (2005)
7. Remove the restraints control module (RCM).
1. Slide and disengage the RCM electrical connector locking clip.
2. Release the tab and disconnect the connector from the RCM.
3. Remove the bolts.
4. Remove the RCM.
Installation
WARNING: The tightening torque of the air bag restraints control module (RCM) bracket retaining bolts is critical for correct system
operation.
1. Install the RCM.
1. Position the RCM.
2. Install the bolts.
3. Connect the RCM electrical connector.
4. Slide and engage the RCM electrical connector locking tab.
2. Install the floor console or utility tray.
3. Repower the system.
