B4000 2WD V6-4.0L SOHC (2003)
Wheel Speed Sensor: Service and Repair
Speed Sensor, Front
SPEED SENSOR, FRONT (4X2) REMOVAL / INSTALLATION
1. Raise and support the vehicle.
2. Disconnect the speed sensor electrical connector and unclip the front speed sensor wire from the vehicle frame.
3. Remove the bolt and speed sensor.
4. Install in reverse order of removal.
Tightening torque 11 - 13 Nm (1.1 - 1.3 kgf-cm, 9 - 10 ft. lbs.)
