mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Vehicle Lifting|Service and Repair|Page 3110 > < Wheel Bearing|Testing and Inspection|Page 3105
Page 1
background image

Vehicle Lifting: Service and Repair

JACKING

Warning:

Do not run the engine when jacking the vehicle. The wheels contacting the ground could cause the vehicle to move.

Make sure the jack and jack stands are properly located to prevent the vehicle from falling. 

Wheel chocks should be used to prevent the vehicle from rolling and falling off the jack.

The jacking point is a tab that extends from the front suspension lower control arm.

The rear jacking points are located on the rear axle.

LIFTING

Caution:

Damage to suspension, exhaust and steering linkage components may occur if care is not exercised when positioning the hoist adapters
prior to lifting the vehicle.

Never use a halfshaft or the differential housing as a lifting point.

Locate the front hoist adapters and rear hoist adapters on the frame of the vehicle as indicated.

Vehicle Lifting|Service and Repair|Page 3110 > < Wheel Bearing|Testing and Inspection|Page 3105