B4000 SE Cab Plus 4 4WD V6-4.0L OHV (2000)
12.
Screen shows "Don't crank engine, Turn Key ON -Wait for authorization".
13.
Screen shows a list of programmable parameters.
14.
*Use dial to scroll to:
TIRE SIZE (See table for reference)
AXLE RATIO (See vehicle certification label (door sticker) for axle code, then see table for code definitions)
4X4 LOW RANGE SWITCH
TRANSFER CASE
15.
To change parameters:
a.
Use the dial to highlight the parameter, press TRIGGER.
b.
Use the dial to highlight the correct value, press TRIGGER.