B4000 SE Cab Plus 4 4WD V6-4.0L OHV (2000)
3. Remove the solenoid clamp.
4. Remove the appropriate solenoid(s).
Installation Note
1. Install the new solenoid(s).
1. TCC
2. SS4/CCS
3. SS2
4. EPC
5. SS3
6. SS1
Caution The solenoid clamp must be installed in the TCC and EPC solenoid grooves, shift solenoid pockets and the No. 204 plug.
2. Install the solenoid clamp.
1. Position the solenoid clamp on the main control valve body.
2. Install the solenoid clamp bolts.
3. Connect the six solenoid electrical connectors.
1. Connect shift solenoid electrical connectors.
2. Connect the TCC solenoid electrical connector.
3. Connect the EPC solenoid connector.
Caution Excessive pressure may break the retaining pins.