B4000 SE Cab Plus 4 4WD V6-4.0L OHV (2000)
Companion Flange: Testing and Inspection
Companion Flange Runout Check
COMPANION FLANGE CIRCULAR RUNOUT CHECK
Caution Pinion bearing preload must be reset if the pinion nut has been loosened or removed for pinion flange reindexing or replacement.
1. Raise the vehicle on a twin-post hoist that supports the rear axle.
2. Remove the propeller shaft.
3. Check the companion flange for damage.
4. Position Companion Flange Runout Gauge SST 205-319 (T92L-4851-B) or equivalent on the companion flange.
5. Position Clamp Plate SST 205-320 (T92L-4851-C) onto Companion Flange Runout Gauge SST 205-319 (T92L-4851-B).
6. Align the holes on SST 205-320 (T92L-4851-C) with the holes in the flange and install the bolts. Snug the bolts evenly.