B4000 SE Cab Plus 4 4WD V6-4.0L OHV (2000)
Seals and Gaskets: Service and Repair
Standard Differential
REAR WHEEL BEARING AND OIL SEAL (STANDARD) REMOVAL/INSTALLATION
Removal Note
1. Remove the axle shaft.
Note If the inner wheel bearing oil seal is leaking, the axle housing vent may be plugged.
2. Use Rear Axle Bearing Remover SST 49-UN01-033, Impact Slide Hammer SST 49-0223-630B and Adapter SST 49-UN11-101 to remove the
rear axle bearing and inner wheel bearing oil seal.
Installation Note
1. Lubricate the new rear wheel bearing.
2. Use Driver Handle SST 49-F027-003 and Axle Tube Bearing Replacer SST 49-H025-001 to install the rear wheel bearing.
3. Lubricate the lip of the new inner wheel bearing oil seal with appropriate grease.
4. Use Driver Handle SST 49-F027-003 and Axle Tube Bearing Replacer SST 49-H025-001 to install the inner wheel bearing oil seal.
5. Install the axle shaft.
