B4000 SE Cab Plus 4 4WD V6-4.0L OHV (2000)
1. Position the digital TR sensor.
2. Loosely install the bolts.
Note The manual lever must be in neutral.
2. Adjust the digital TR sensor.
1. Install SST into the three slots on the digital TR sensor.
2. Tighten the bolts
3. Install the manual control outer lever.
1. Install the manual control outer lever.
2. Install the manual control outer lever nut.
4. Connect the TR sensor electrical connector.
5. Connect the shift cable to the manual control outer lever.
6. Adjust the shift cable. Refer to Transmission and Drivetrain; Automatic Transmission/Transaxle; Shift Cable, A/T.
7. Lower the vehicle.