B4000 SE Cab Plus 4 4WD V6-4.0L SOHC (2001)
8. Remove the bolt and detach the compressor manifold and tube assembly.
9. Lower the vehicle.
10. Remove the compressor manifold and tube assembly.
11. To install, reverse the removal procedure.
-
If a new compressor manifold and tube assembly is to be installed, transfer the pressure cutoff switch to the new compressor manifold and tube
assembly.
-
Lubricate the refrigerant system with the correct amount of clean refrigerant oil.
-
Install new O-ring seals lubricated with clean refrigerant oil.
12. Evacuate, leak test, and charge the refrigerant system.