B4000 SE Cab Plus 4WD V6-4.0L OHV (1997)
Follow disassembly steps in reverse order for assembly, referring to the following
Rotor Shaft Retaining Ring (11)
Install the retaining ring in the groove at the end of the rotor shaft using Retaining Ring Pliers D79L-7000-A, or equivalent.
Shaft Seal, Retainer (17 & 18)
1. Install a new rotor shaft seal using Seal Driver T78P-3733-A3, or equivalent and plastic mallet.
2. Install the retainer using Seal Driver T78P-3733-A3, or equivalent and a plastic mallet.
Disc Spring (16)
The disc spring must be inserted with the dished surface upward.
Lower Plate (15)
1. Lubricate the inner and outer O-ring seals with ATF Type F (M2C33-F) of Dexron II.
2. Install the O-ring seals on the lower plate.