B4000 SE Regular Cab 4WD V6-4.0L OHV (1999)
Drive Belt Tensioner: Service and Repair
BELT TENSIONER REMOVAL/INSTALLATION
1. Remove the drive belt.
2. Remove the belt tensioner bolt and the belt tensioner.
3. Install in the reverse order of removal.
Note:
^
Observe the location of the alignment tab on installation.
4. Position the belt tensioner and install the bolt.
Tightening torque: 40 - 55 Nm (4.1 - 5.6 kgf.m, 30 - 40 ft. lbs.)