B4000 SE Regular Cab 4WD V6-4.0L OHV (1999)
Compressor Clutch: Service and Repair
Removal Note
1. Remove the A/C compressor
2. Remove the A/C clutch hub retaining bolt.
1. Hold the A/C clutch hub with the Spanner Wrench SST 49-UN-10 -042.
2. Remove the bolt.
3. Remove the A/C clutch and the A/C clutch hub spacer.
1. Thread an 8 x 1.25 mm bolt into the A/C clutch to force it from the compressor shaft.
2. Lift the A/C clutch and the A/C clutch hub spacer from the compressor shaft.
4. Remove the pulley snap ring.
5. Remove the A/C clutch pulley.
CAUTION: Do not use air tools. The A/C clutch field coil can be easily damaged.
6. Remove the A/C clutch field coil.
1. Mark the location of the A/C clutch field coil electrical connector.