mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Light Combination Switch - Revised|Page 3056 > < Light Combination Switch - Revised|Page 3047
Page 1
background image

Turn Signal Switch: All Technical Service Bulletins
Light Combination Switch - Revised

Category       

Applicable Model/s                      

Subject

Bulletin No. 011/85

15

1986 B2000

LIGHT COMBINATION SWITCH

Issued

7/16/85

Revised

DESCRIPTION

In some 1986 B2000 there is a possibility of the parking lights remaining on after the light switch is turned to the "OFF" position due to insufficient
clearance between the contact points in the light and turn switch.

For this reason you are requested to replace the light and turn switch at P.D.I. or as soon as possible if the vehicle is within the VIN range listed below.

LABEL LOCATION

NOTE:
If the vehicle has a blue or purple label attached to the left or right upper corner of the windshield or the underside of the column cover, the repair has
already been made at the production facility or prior to the distribution to your dealership.
APPLICABLE VIN RANGE

B2000 Short Bed:

JM2UF111 G0541480-551689

Long Bed:

JM2UF211 G0541480-551689

PARTS INFORMATION

PART NUMBER

DESCRIPTION

UB39 66 122

Light & Turn Switch

CYLINDER TRIM RING/COLUMN COVERS

REPAIR PROCEDURE

1.

Remove 5 screws securing the column covers.

2.

Remove the key cylinder trim ring.

3.

Remove the upper and lower column covers.

Light Combination Switch - Revised|Page 3056 > < Light Combination Switch - Revised|Page 3047