B Series Truck L4-2000 1998cc (1986)
HAZARD SWITCH
14.
Check the operation of the hazard switch.
TURN SIGNAL SWITCH
15.
Check the operation of the turn signal switch.
16.
Reconnect the 3 connectors disconnected in Step 4. Make sure that each light goes on and off.
17.
Reinstall the column covers and the key cylinder trim ring.
NOTE:
One screw is different than the other 4 screws and is installed near the center of the column cover.
MAKE DOT ON COLUMN COVER
18.
Using a felt tip marker pen, make a small dot, approximately 1/4 "diameter on the underside of the lower column cover to show that the repair has
been completed.
WARRANTY INFORMATION
Customer Comment Code:
99
Damage Code:
99
Process No:
A5-008A
Part No. of Main Cause:
UB39 66 122
Operation No:
XX0064-RX
Labor Hour:
0.5 Hr.
