B Series Truck L4-2000 1998cc (1986)
SCREWS
9.
Remove 3 screws on the light and turn switch and remove the switch.
MATCHING MARKS
10.
Align the matching marks on the new light and turn switch as follows:
a.
Push fully in the direction shown.
b.
Align to "N". (The center of the sliding part should be at the "N" position.)
c.
Align to "OFF".
d.
Align to "HU".
11.
Install the new light and turn switch to the combination switch using the 3 screws removed in Step 9.
LIGHT SWITCH
12.
Check the operation of the light switch.
^
First click stop - parking lights
^
Second click stop - headlights
HEADLIGHT FLASHER SWITCH
13.
Check the operation of the low beam, high beam and headlight flasher switch.
