B Series Truck 2WD L4-2555cc 2.6L SOHC (1987)
Oil Level Warning Indicator: Customer Interest
Engine Oil Level Gauge & Pipe - Rust
Category
Applicable Model/s
Subject
Bulletin No. 025/87
1
1987 B2600 4x4
ENGINE OIL LEVEL GAUGE & PIPE
Issued
7/27/87
Revised
DESCRIPTION
In order to prevent the inside of the engine oil level gauge pipe from rusting, anti-rust oil has been applied inside the pipe since May 21, 1987.
For vehicles produced prior to the above modification, the oil level gauge may rust because the rust generated inside the pipe will be transferred to the
oil level gauge.
Therefore, you are requested to replace the oil level gauge and pipe with the new parts which have anti-rust oil. After replacing the oil level gauge and
pipe, mark a black dot on the pipe stay as shown in order to distinguish the modified one from the original.
VIN OF PRODUCTION CHANGE
PARTS INFORMATION
PART NO.
DESCRIPTION
AM16 10 450
Engine Oil Level Gauge
AM16 10 441
Engine Oil Level Gauge Pipe
NOTE:
^
Although the part numbers have not been changed, anti-rust oil has been applied to all replacement parts.
^
Before replacing the oil level gauge and pipe, check if there is a black dot on the pipe stay. If a black dot is on the stay, it is not necessary to
replace the parts.
WARRANTY INFORMATION
Customer Comment Code:
99
Damage Code:
07
Part No. of Main Cause:
AM16 10 441
Operation No:
10325XRX
Labor Hour:
0.3 Hr.