B Series Truck 4WD L4-2606cc 2.6L SOHC (1992)
2. Insert the left and right balance shaft assembly into the cylinder block.
Caution: Do not damage the balance shaft bushings and journals during installation.
3. Loosely tighten the thrust plate lock bolts.
4. Confirm the smooth rotation of the balance shafts.
5. Tighten the thrust plate lock bolts.
Tightening torque: 7.9-10.7 N.m ~80-110 kgfcm, 70-95.4 in.lbf)
Balancer Chain
1. Install the crankshaft sprocket.
2. Set the balancer chain on the idler sprocket assembly so that the timing mark on the idler sprocket assembly and the brown link of the balancer
chain align.
