B Series Truck 4WD L4-2606cc 2.6L SOHC (1992)
5. Align the matching marks of the wheel hub and the disc plate, and tighten the mounting bolts.
Tightening torque: 54-69 N.m (5.5-7.0 m-kg, 40-51 ft-lb)
6. Apply grease (lithium base, NLGI No.2) to the area indicated by oblique lines.
7. Install the outer bearing race and washer in the hub.
6. Apply grease (lithium base, NLGI No.2) to the area indicated by oblique lines.
7. Install the outer bearing race and washer in the hub.
INSTALLATION
1. Insert the front axle drive shaft into the knuckle, and install the nut for the lower arm ball joint; tighten it by hand.
2. Jack up the lower arm so that the upper arm ball joint is connected to the knuckle.