B Series Truck 4WD L4-2606cc 2.6L SOHC (1992)
7. After installing the hub and disc plate, adjust the bearing preload.
(1) Tighten the lock nut; then turn the hub and plate 2 or 3 times to seat the bearing.
(2) Loosen the lock nut so that they can be turned by hand.
(3) Attach a pull scale to a wheel lug bolt, and measure the frictional force.
Preload
Frictional force plus: 6-12 N (0.6-1.2 kg, 1.3-2.6 lb)
(4) Tighten the locknut until the preload reaches the specified preload with the SST.
(5) Install the bearing set plate using two bolts.
Tightening torque: 5-7 N.m (50-70 cm-kg, 43-61 in-lb)
(6) Coat the spacer with grease (lithium base, NLGI No.2), and install it.
(7) Install a new snap ring.