mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Body - Service Bumper Specification Change|Page 7810 > < Body - Service Bumper Specification Change|Page 7808
Page 1
background image

Rear Bumper Cover / Fascia: By Symptom

Technical Service Bulletin # 0904509

Date: 090817

Body - Rear Bumper Rattles At Highway Speeds

Bulletin No: 09-045/09

Last Issued: 08/17/2009

Subject
RATTLE NOISE FRONT REAR BUMPER

APPLICABLE MODEL(S)/VINS
2007-2010 CX-7

DESCRIPTION

Some vehicles may exhibit a rattle noise from the rear bumper during highway driving. Wind pressure while driving makes the rear bumper fixing point
clearance larger, causing a rattle noise.

Customers having this concern should have their vehicle repaired using the following repair procedure.

REPAIR PROCEDURE

Add plain washers between the rear bumper cover and the vehicle body to eliminate looseness and replace fasteners with new ones.

1. Verify customer concern.

2. Remove two (2) fasteners (A).

Body - Service Bumper Specification Change|Page 7810 > < Body - Service Bumper Specification Change|Page 7808