CX-7 L4-2.3L Turbo (2007)
1. Remove the tie-rod end ball joint locknut.
2. Disconnect the tie-rod end ball joint using the SST.
Steering Gear And Linkage, Front Stabilizer, Front Lower Arm And Front Crossmember Component Removal Note
1. Support the crossmember component with a jack.
2. Loosen the bolts of the No.1 engine mount (engine side).
3. Remove the No.1 engine mount bolt (engine side).
4. Lower the steering gear and linkage, front stabilizer, front lower arm and front crossmember component slightly