CX-7 L4-2.3L Turbo (2007)
Glove Compartment: Technical Service Bulletins
Interior - Glove Compartment Removal/Installation
TSB: 09-019/07
2007 CX-7 - GLOVE COMPARTMENT REMOVAL / INSTALLATION PROCEDURE
APPLICABLE MODEL(S)/VINS
2007 CX-7
DESCRIPTION
When it becomes necessary to remove/install the glove compartment, be sure to follow the Workshop Manual instructions. If the Workshop Manual
instructions are not followed, the glove compartment may become broken due to mishandling and cause a hard to open/close concern.
GLOVE COMPARTMENT REMOVAL/INSTALLATION
1.
Press the stay damper in the direction shown by the arrow and detach it from the glove compartment lid.
2.
Bend the stoppers inward to remove.
3.
Turn the glove compartment downward and pull the pins.
4.
Remove the glove compartment.
5.
Install in reverse order of removal.
Disclaimer
