CX-7 L4-2.3L Turbo (2007)
Sunroof / Moonroof Motor: Removal and Replacement
SUNROOF MOTOR REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the following parts:
1. A-pillar lower trim
2. A-pillar trim
3. Front scuff plate inner
4. Rear scuff plate inner
5. B-pillar lower trim
6. Front seat belt upper anchor installation bolt
7. B-pillar upper trim
8. Rear seat
9. Sub trunk box
10. Trunk end trim
11. Trunk side trim
12. C-pillar trim
13. D-pillar trim
14. Map light
15. Sunvisor
16. Assist handle
17. Headliner
3. Disconnect the sunroof motor connector.
4. Remove the screws, and then remove the sunroof motor.
5. Install in the reverse order of removal.
NOTE: If the glass panel or the sunroof motor is moved with the sunroof motor removed, initial position setting of the sunroof motor will be
required. Perform initial position setting referring to the Sunroof Motor Assembly Note.
