CX-7 L4-2.3L Turbo (2007)
Brake Rotor/Disc: Testing and Inspection
Rear
Disc Plate Thickness Inspection
Caution
^
Excessive runout may result if the disc plate is removed from the vehicle then machined. Machine the disc plate while installed on the
vehicle.
1. Measure the thickness of the disc plate.
^
If the thickness is not within the specification, replace the disc plate.
Minimum rear disc plate thickness 16 mm (0.63 in)
Minimum rear disc plate thickness after machining using a brake lathe on-vehicle 16.8 mm (0.66 in)