CX-7 L4-2.3L Turbo (2007)
3. Bend the end cable tab (rear parking brake cable side) in the direction shown in the figure.
4. Move the rear parking brake cable end in the direction shown in the figure and disconnect it from the end cable.
5. Remove the end cable.
Brake Caliper Component Removal Note
1. Remove the brake caliper assembly from the trailing link and suspend it with a cable so it does not interfere.
Disc Plate Removal Note
1. If any disc plate is difficult to remove, perform the following steps to remove it.
(1) Insert a flathead screwdriver into the service hole and turn the adjuster in the direction of the arrow to compress the parking brake shoe.
(2) Remove the disc plate.
Parking Brake Shoe Removal Note
