CX-7 L4-2.3L Turbo (2007)
2. After installing the opening of the parking brake shoe to the adjuster bolt and tappet, push the brake shoe upward and attach it to the shoe stopper.
Disc Plate, Screw Installation Note
1. Measure the inner diameter of the disc plate with a vernier caliper. If it exceeds the maximum diameter, install the new disc plate.
Maximum rear disc plate inner diameter 191.0 mm (7.52 in)
2. Install the disc plate and screw.
3. Perform the following steps to adjust the shoe clearance after installing the disc plate and the screws.
(1) Insert a flathead screwdriver into the service hole and turn the adjuster in the direction of the arrow to expand the parking brake shoe until the
disc plate cannot rotate.