CX-7 L4-2.3L Turbo (2007)
Vacuum Brake Booster: Service and Repair
POWER BRAKE UNIT REMOVAL/INSTALLATION
1. Remove the battery and battery tray.
2. Remove the battery tray bracket as shown in the figure.
3. Remove the master cylinder component.
4. Remove the brake pipe as shown in the figure.
5. Remove the accelerator pedal.
6. Remove in the order indicated in the table.
7. Install in the reverse order of removal.
8. After installation, add brake fluid, bleed the air, and inspect for fluid leakage.
9. Inspect the brake pedal.
