CX-7 L4-2.3L Turbo (2007)
Headlamp Control Module: Removal and Replacement
Auto Light Control Module Removal/Installation
AUTO LIGHT CONTROL MODULE REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the meter hood.
3. Remove the instrument cluster.
4. Remove in the order indicated in the table.
5. Install in the reverse order of removal.
Discharge Headlight Control Module Removal/Installation
DISCHARGE HEADLIGHT CONTROL MODULE REMOVAL/INSTALLATION
WARNING: Incorrect servicing of the discharge headlights could result in electrical shock. Before servicing the discharge headlights, always
refer to the discharge headlight service warnings.
1. Disconnect the negative battery cable.
2. Remove the front bumper.
3. Remove the front combination light.
4. Remove in the order indicated in the table.
5. Install in the reverse order of removal.