CX-7 L4-2.3L Turbo (2007)
Power Steering Fluid: Testing and Inspection
POWER STEERING FLUID INSPECTION
Fluid Level Inspection
1. Inspect the power steering fluid level.
^
Add fluid to the specified level as necessary.
Power steering fluid type ATF M-III, M-V or equivalent (e.g. Dexron(R) II)
Power steering fluid capacity (approximately quantity) 0.9 L (0.95 US qt, 0.79 Imp qt)
Fluid Leakage Inspection
1. Start the engine and let it idle.
2. Turn the steering wheel fully to the left and right to apply fluid pressure.
Caution:
^
If the steering wheel is kept in the fully turned position for more than 5, the fluid temperature will rise excessively and adversely affect
the oil pump.
3. Inspect for fluid leakage. If fluid leakage is found, replace related pipe or hose.
Note:
^
The points where fluid leakage may occur are indicated in the figure.
Fluid Pressure Inspection
1. Assemble the SSTs as shown in the figure.
2. Disconnect the pressure pipe from the oil pump, and connect the SSTs.
