CX-7 L4-2.3L Turbo (2007)
-
To remove the wiring harness from the clip in the engine room, pry up the hook of the clip using a flathead screwdriver.
Caution: Do not remove the Harness protective tape. Otherwise, the wires could rub against the body, which could result in water
penetration and electrical shorting.
CONNECTORS
Data Link Connector
-
Insert the probe into the terminal when connecting a jumper wire to the data link connector.
Caution: Inserting a jumper wire probe into the data link connector terminal may damage the terminal.
Disconnecting Connectors
-
When disconnecting connector, grasp the connectors, not the wires.