CX-7 L4-2.3L Turbo (2007)
4. Verify that the manual shaft is in the P position.
Caution:
^
Bending the selector cable in the manner shown in the figure will damage the cable and it may become loose when shifted. When
installing the selector cable, hold it straight.
5. Install the clip as shown in the figure.
Note:
^
Install the selector lever to the manual shaft lever with the clip side of the selector cable end facing up.
6. Install the selector lever to the manual shaft lever so that no load acts on the selector cable.
7. Confirm that the tip of the manual shaft lever projects out of the end of the selector cable.
8. Securely install the selector cable to the selector cable bracket.
Interlock Cable Installation Note
1. Push the interlock cable.
