CX-7 L4-2.3L Turbo (2007)
9. Place the TFT sensor and a thermometer in ATF as shown in the figure, and heat the ATF gradually.
10. Measure the resistance between the coupler component terminals B7 and B8.
^
If there is any malfunction, replace the TFT sensor.
Transaxle Fluid Temperature (TFT) Sensor
11. Install the TFT sensor.
12. Install the control valve body
13. Install the thermo valve.
14. Install the resonance chamber.
15. Add ATF to the specified level.
16. Install the under cover.
17. Install the air cleaner component.
18. Connect the negative battery cable.
