CX-7 L4-2.3L Turbo (2007)
5. Install the windshield molding.
6. Use glass primer on the glass, then allow it to dry for approx. 30 min.
CAUTION: To prevent weakening of the primer adhesion, keep the bonding surface free of dirt, moisture, and grease. Do not touch the
surface with your hand.
NOTE: Make sure to apply primer to the hollowed marks in the ceramic coating.
7. Cut away the old sealant using a razor or scraper so that 1-2 mm (0.04-0.07 in) thickness of sealant remains along the perimeter of the frame.
