CX-7 L4-2.3L Turbo (2007)
4. B-pillar upper trim
5. Rear seat
6. Sub trunk box
7. Trunk end trim
8. Trunk side trim
9. C-pillartrim
10. D-pillartrim
11. Map light
12. Sunvisor
13. Assist handle
13. Disconnect joint pipe E.
14. Remove the headliner.
15. Remove rear washer hose D from clips C and D.
16. Cut the urethane of the headliner and remove the tape and rear washer hose D.
NOTE: After installing the rear washer hose, reinforce the urethane that was cut when removing.
17. Remove rear washer hose E from the rear washer nozzle.
18. Install in the reverse order of removal.