mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

ABS/TCS - DSC Activation On Low Speed Turns|Page 3902 > < Electronic Brake Control Module|Locations
Page 1
background image

Hydraulic Assembly: All Technical Service Bulletins
ABS/TCS - DSC Activation On Low Speed Turns

Bulletin No: 04-003/10 
Last Issued: 05/27/2010

Subject:
DSC ACTIVATION WHILE TURNING AT SLOW SPEEDS

APPLICABLE MODEL(S)/VINS

2008-2010 CX-9 built before JM3 TB****A* 214479 (January 8, 2010)

DESCRIPTION

Some customers may experience a metallic crunching/shudder affect when attempting left or right turning with slight road incline at slow speed (less than
9 mph /15 km/h).

Customers having this concern should have their vehicle repaired using the following repair procedure.

REPAIR PROCEDURE

1. Verify customer concern.

2. Replace the ABS/DSC Hydraulic-Unit (A). Refer to MS3 on line or Workshop Manual (section 04-18 DSC/RSC HU/CM

REMOVAL/INSTALLATION) for replacement procedure.

3. Verify repair.

PART(S) INFORMATION

ABS/TCS - DSC Activation On Low Speed Turns|Page 3902 > < Electronic Brake Control Module|Locations