CX-9 AWD V6-3.7L (2008)
Auxiliary Power Outlet: Service and Repair
Accessory Socket
ACCESSORY SOCKET REMOVAL/INSTALLATION
Front
1. Disconnect the negative battery cable.
2. Remove the following parts.
1. Decoration panel
2. Front console box mat
3. Indicator panel
4. Front console box
3. Remove in the order indicated in the table.
4. Install in the reverse order of removal.
Center
1. Disconnect the negative battery cable.
2. Remove the console panel.
3. Remove the console.
4. Remove in the order indicated in the table.
5. Install in the reverse order of removal.
Rear
1. Disconnect the negative battery cable.
2. Remove the following parts.
1. Trunk box
2. Seat side box
3. Trunk end trim
4. Third-row seat
5. Rear scuff plate inner (RH)
6. Third-row seat belt lower anchor installation bolt (RH)
7. Trunk side trim (Passenger side)
3. Remove the console panel.
4. Remove the console.