CX-9 AWD V6-3.7L (2008)
Seat Occupant Classification Module - Air Bag: Service and Repair
SEAT WEIGHT SENSOR CONTROL MODULE REMOVAL/INSTALLATION
CAUTION: When the seat weight sensor control module is replaced with a new one, perform the seat weight sensor calibration using the
M-MDS (See SEAT WEIGHT SENSOR CALIBRATION.). See: Restraint Systems/Air Bag Systems/Seat Occupant Sensor/Adjustments
1. Turn the ignition switch to the LOCK position.
2. Disconnect the negative battery cable and wait for 1 min or more.
3. Remove the front passenger seat.
4. Remove in the order indicated in the table.
5. Install in the reverse order of removal.
