mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Altitude Compensator - Modified|Page 837 > < Air/Fuel Mixture|Page 832
Page 1
background image

Altitude Compensator: Technical Service Bulletins
Altitude Compensator - Modified

Category 1A
Applicable Model/s 1984 GLC
Subject SERVO DIAPHRAGM AND HIGH ALTITUDE

COMPENSATOR MODIFICATION
Bulletin No. 035/83
Issued

12/23/83

Revised

3/28/84

Since this service bulletin is a replacement of the previous one, the former category is used. Please discard the previous service bulletin and insert this
bulletin into the binder instead of the previous one.

IDENTIFICATION MARKS

DESCRIPTION

To improve idle stability and low speed driveability (around 2000 rpm) in high altitude areas, air conditioner servo diaphragm and high altitude
compensator have been modified as follows.

1.

The return spring in the servo diaphragm has been weakened.

2.

The starting point of the high altitude compensator operation has been changed from 3608 ft to 2100 ft and the diameter of the orifice used
for EGR compensation has been enlarged.

These modifications took place since the production date of November, 1983.

VIN OF PRODUCTION CHANGE

Sedan:

JM1BD221 E0759911              November, 1983

3 Door Hatchback:

JM1BD231 E0760602

November, 1983

5 Door Hatchback:

JM1BD241 E0750333

November, 1983

PARTS INFORMATION

PART NUMBER

NEW

OLD

DESCRIPTION

QTY

INTERCHANGEABILITY

8325 13 950A

8325 13 950

Servo Diaphragm

1

NEW to OLD

E563 23 950

Servo Diaphragm*

NEW to OLD

(For Service Parts Only)*

1

E563 20 480B   

E563 20 480A*     

High Attitude Compensator*

1

NEW to OLD

Note:

The modified parts have an identification mark as shown below.

Altitude Compensator - Modified|Page 837 > < Air/Fuel Mixture|Page 832