Mazdaspeed3 L4-2.3L Turbo (2010)
Ignition Switch: Testing and Inspection
IGNITION SWITCH INSPECTION [WITHOUT ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM]
1. Disconnect the negative battery cable.
2. Remove the column cover. See: Steering and Suspension/Steering/Steering Column/Steering Column Cover/Service and Repair
3. Remove the ignition switch. See: Service and Repair
4. Verify that the continuity between the ignition switch terminals is as indicated in the table.
-
If not as indicated in the table, replace the ignition switch.