mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Rear Console - Surface Cracked|Page 4725 > < Rear Cross-Member|Service and Repair|Page 4715
Page 1
background image

Console: Customer Interest
Rear Console - Surface Cracked

Bulletin No.: 013/97
Issued: 07/01/97
Revised:

Category
S

Applicable Model/s
1995-96 Millenia

Subject:
REAR CONSOLE SURFACE CRACKED

APPLICABLE MODELS 
1995-96 Millenia

DESCRIPTION
The rear console surface may harden due to exposure to sunlight and crack from use as an armrest The material of near console surface has been
modified to reduce cracking. Customers complaining of this concern, should have the vehicle inspected and the outer console lid replaced, if necessary.

NOTE

Replace only the outer console lid.

REPAIR PROCEDURE

1.

Verify complaint

2.

Use a flat screwdriver with tape around its blade to remove the inner console lid.

NOTE

Remove the inner console lid by pulling the console lid lock lever.

CAUTION

Remove carefully so that the claws do not break.

3.

Remove the outer console lid from the hinge.

4.

Remove the console lid lock.

5.

Replace only the outer console lid with a new one.

6.

Assemble in the reverse order of removal.

NOTE

Before installing the inner console lid, make sure that the console lid opens and closes smoothly. If it fits improperly, adjust the hinge to lid fit.

Rear Console - Surface Cracked|Page 4725 > < Rear Cross-Member|Service and Repair|Page 4715