mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Front Door Weather Strip - Out of Position|Page 5314 > < Door Weatherstrip - Wind Noise Around Doors|Page 5309
Page 1
background image

Weatherstrip: Customer Interest
Front Door Weather Strip - Out of Position

Bulletin No.: 018/95
Issued: 6/2/95
Revised

Category

S

Applicable Model/s
1995
Millenia

Subject 
FRONT DOOR WEATHERSTRIP OUT OF POSITION

APPLICABLE MODELS/VINS

1995 Millenia vehicles with a VIN of JM1TA22**S1110488 and lower.

DESCRIPTION

The front door weather strip may move out of position. Refer to Fig. 1. This may be caused by an insufficient fitting force between the sash and weather
strip. To prevent movement, the weather strip is now adherred to the sash area.

Customers complaining of this the weather strip movement should have the vehicle inspected and if necessary repaired according to this bulletin. If the
weather strip is torn, replace with a new part and proceed to step 3.

REPAIR PROCEDURE

1.

Verity the concern.

2.

Move weather strip into correct position.

Front Door Weather Strip - Out of Position|Page 5314 > < Door Weatherstrip - Wind Noise Around Doors|Page 5309