Millenia V6-2255cc 2.3L DOHC (1995)
6. Tighten the bolts in the order shown. Verify that the camshaft remains horizontal as the camshaft cap bolts (marked (1) in the image) tightened.
Tightening torque:
11.3 - 14.2 Nm (100 - 125 inch lbs.)
7. Retighten the bolts in the order shown.
Tightening torque:
11.3 - 14.2 Nm (100 - 125 inch lbs.)
8. Apply clean engine oil to the lip of the new camshaft oil seal.
9. Push in the oil seal slightly by hand.
10. Tap in the camshaft oil seal evenly with the SST and a hammer.
11. Tap in the new blind cap by using a plastic hammer.
CAMSHAFT PULLEY INSTALLATION NOTE