Millenia V6-2255cc 2.3L DOHC (1995)
CAUTION: The following will damage the belt and shorten its life; forcefully twisting it, turning it inside out, bending it, or allowing oil or
grease on it.
4. Remove the timing belt.
TIMING BELT AUTO TENSIONER INSTALLATION NOTE
1. Measure the auto tensioner rod projection A. Replace the auto tensioner if necessary.
2. Inspect the auto tensioner for oil leakage. Replace the auto tensioner if necessary.
Projection A (free length):
14.3 - 15.1 mm (0.563 - 0.594 inch)
CAUTION: Applying pressure of more than 9.8 kn (2,200 lbs.) can damage the auto tensioner.
3. Slowly press in the tensioner rod by using a press.
4. Insert a pin into the hole in the body as shown to hold the tensioner rod.
Pin diameter:
1.6 mm (0.063 inch)
TIMING BELT INSTALLATION NOTE